ISEP - DEC - Artigos
Permanent URI for this collection
Browse
Browsing ISEP - DEC - Artigos by Issue Date
Now showing 1 - 10 of 28
Results Per Page
Sort Options
- Analysis of the Out-Of-Plane Seismic Behavior of Unreinforced Masonry: A Literature ReviewPublication . Ferreira, Tiago Miguel; Costa, Alexandre A.; Costa, AníbalAlthough the issue of the out-of-plane response of unreinforced masonry structures under earthquake excitation is well known with consensus among the research community, this issue is simultaneously one of the more complex and most neglected areas on the seismic assessment of existing buildings. Nonetheless, its characterization should be found on the solid knowledge of the phenomenon and on the complete understanding of methodologies currently used to describe it. Based on this assumption, this article presents a general framework on the issue of the out-of-plane performance of unreinforced masonry structures, beginning with a brief introduction to the topic, followed by a compact state of art in which the principal methodologies proposed to assess the out-of-plane behavior of unreinforced masonry structures are presented. Different analytical approaches are presented, namely force and displacement-based, complemented with the presentation of existing numerical tools for the purpose presented above. Moreover, the most relevant experimental campaigns carried out in order to reproduce the phenomenon are reviewed and briefly discussed.
- Mechanical properties of chemically modified portuguese pinewoodPublication . Lopes, Duarte Barroso; Mai, Carsten; Militz, HolgerTo turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experimentally: Modulus of elasticity measured statically, stiffness stabilization efficiency in different climates (30 and 87% of relative humidity), modulus of rupture, work maximum load, impact bending strength, compression, tensile and shear strength at indoor conditions (65% of relative humidity). In both types of active principle of modification, cell wall or lumen fill, no significant changes on the bending stiffness (modulus of elasticity) were found. In the remaining properties analysed significant changes in the modified wood-material took place compared to unmodified wood control: - Cell wall modification was the most effective method to achieve high stiffness stabilization efficiency (up to 60%) and also increased compression strength (up to 230%). However, modulus of rupture, tensile, shear and the impact bending strength were reduced by both resins, but in a varying extent, where the N-methylol melamine formaldehyde endured less reduction than 1,3-dimethylol-4,5-dihydroxyethyleneurea resin. In the latter, reduction up to 60% can take place. - In the lumen fill modification: tetra-alkoxysilane has no effect in the mechanical properties. Although, a slight increase in shear strength parallel to the grain was found. Wax specimens have shown a slight increase in bending strength, compression, tensile and shear strength as well as in the absorption energy capacity.
- A simplified four-branch model for the analytical study of the out-of-plane performance of regular stone URM wallsPublication . Ferreira, Tiago Miguel; Costa, Alexandre A.; Vicente, Romeu; Varum, HumbertoDuring the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.
- Simulation of masonry out-of-plane failure modes by multi-body dynamicsPublication . Costa, Alexandre A.; Penna, Andrea; Arêde, António; Costa, AníbalThe seismic assessment of the local failure modes in existing masonry buildings is currently based on the identification of the so-called local mechanisms, often associated with the out-of-plane wall behavior, whose stability is evaluated by static force-based approaches and, more recently, by some displacement-based proposals. Local mechanisms consist of kinematic chains of masonry portions, often regarded as rigid bodies, with geometric nonlinearity and concentrated nonlinearity in predefined contact regions (unilateral no-tension behavior, possible sliding with friction). In this work, the dynamic behavior of local mechanisms is simulated through multi-body dynamics, to obtain the nonlinear response with efficient time history analyses that directly take into account the characteristics of the ground motion. The amplification/filtering effects of the structure are considered within the input motion. The proposed approach is validated with experimental results of two full-scale shaking-table tests on stone masonry buildings: a sacco-stone masonry façade tested at Laboratório Nacional de Engenharia Civil and a two-storey double-leaf masonry building tested at European Centre for Training and Research in Earthquake Engineering (EUCENTRE).
- Efficiency of strengthening techniques assessed for existing masonry buildingsPublication . Diz, Sérgio; Costa, Aníbal; Costa, Alexandre A.The Azores archipelago is a zone with a vast cultural heritage, presenting a building stock mainly constructed in traditional stone masonry. It is known that this type of construction exhibits poor behaviour under seismic excitations; however it is extensively used in seismic prone areas, such as this case. The 9th of July of 1998 earthquake was the last seismic event in the islands, leaving many traditional stone constructions severely damaged or totally destroyed. This scenario led to an effort by the local government of improving the seismic resistance of these constructions, with the application of several reinforcement techniques. This work aims to study some of the most used reinforcement schemes after the 1998 earthquake, and to assess their effectiveness in the mitigation of the construction’s seismic vulnerability. A brief evaluation of the cost versus benefit of these retrofitting techniques is also made, seeking to identify those that are most suitable for each building typology. Thus, it was sought to analyze the case of real structures with different geometrical and physical characteristics, by establishing a comparison between the seismic performance of reinforced and non-reinforced structures. The first section contains the analysis of a total of six reinforcement scenarios for each building chosen. Using the recorded 1998 earthquake accelerograms, a linear time-history analysis was performed for each reinforcement scenario. A comparison was then established between the maximum displacements, inter-storey drift and maximum stress obtained, in order to evaluate the global seismic response of each reinforced structure. In the second part of the work, the examination of the performance obtained in the previous section, in relation to the cost of implementing each reinforcement technique, allowed to draw conclusions concerning the viability of implementing each reinforcement method, based on the book value of the buildings in study.
- Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influencePublication . Ferreira, Tiago Miguel; Costa, Alexandre A.; Arêde, António; Gomes, Ana; Costa, AníbalStone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.
- Longshore Transport Estimation on Ofir Beach in Northwest Portugal: Sand-Tracer ExperimentPublication . Fernández-Fernández, Sandra; Baptista, Paulo; Martins, Virgínia A.; Silva, Paulo A.; Abreu, Tiago; Pais-Barbosa, Joaquim; Bernardes, Cristina; Miranda, Paulo; Rocha, Mariana V. L.; Santos, Fábio; Bernabeu, Ana; Rey, DanielThis work aims to shed some light on longshore sediment transport (LST) in the highly energetic northwest coast of Portugal. Data achieved through a sand-tracer experiment are compared with data obtained from the original and the new re-evaluated longshore sediment transport formulas (USACE Waterways Experiment Station’s Coastal Engineering and Research Center, Kamphuis, and Bayram bulk formulas) to assess their performance. The field experiment with dyed sand was held at Ofir Beach during one tidal cycle under medium wave-energy conditions. Local hydrodynamic conditions and beach topography were recorded. The tracer was driven southward in response to the local swell and wind- and wave-induced currents (Hsb=0.75mHsb=0.75m, Tp=11.5sTp=11.5s, θb=8−12°θb=8−12°). The LST was estimated by using a linear sediment transport flux approach. The obtained value (2.3×10−3m3⋅s−12.3×10−3m3⋅s−1) approached the estimation provided by the original Bayram formula (2.5×10−3m3⋅s−12.5×10−3m3⋅s−1). The other formulas overestimated the transport, but the estimations resulting from the new re-evaluated formulas also yield approximate results. Therefore, the results of this work indicated that the Bayram formula may give satisfactory results for predicting the longshore sediment transport on Ofir Beach.
- In situ Out-of-Plane Cyclic Testing of Original and Strengthened Traditional Stone Masonry Walls Using AirbagsPublication . Ferreira, Tiago Miguel; Costa, Alexandre A.; Arêde, António; Varum, Humberto; Costa, AníbalThis article presents a field experimental campaign carried out on an existing one-story stone masonry building, aiming at characterizing the out-of-plane behavior of its walls. A bidirectional test set-up based on a self-equilibrated airbag system was developed and used on three similarmasonry walls under distinct conditions: original, retrofitted, and strengthened. The results obtained and the main advantages and shortcomings found in the test set-up are discussed. Finally, some of the most popular retrofitting and/or strengthening techniques applied during the 1998 Azores reconstruction process are critically analyzed, aiming at suggesting quantifications for future interventions on existing unreinforced masonry buildings.
- Vibrations inside buildings due to subway railway traffic. Experimental validation of a comprehensive prediction modelPublication . Lopes, Patrícia; Fernández Ruiz, Jésus; Alves Costa, Pedro; Medina Rodríguez, L.; Cardoso, António SilvaThe present paper focuses on the experimental validation of a numerical approach previously proposed by the authors for the prediction of vibrations inside buildings due to railway traffic in tunnels. The numerical model is based on the concept of dynamic substructuring and is composed by three autonomous models to simulate the following main parts of the problem: i) generation of vibrations (train-track interaction); ii) propagation of vibrations (track-tunnel-ground system); iii) reception of vibrations (building coupled to the ground). The experimental validation consists in the comparison between the results predicted by the proposed numerical model and the measurements performed inside a building due to the railway traffic in a shallow tunnel located in Madrid. Apart from the brief description of the numerical model and of the case study, the main options and simplifications adopted on the numerical modeling strategy are discussed. The balance adopted between accuracy and simplicity of the numerical approach proved to be a path to follow in order to transfer knowledge to engineering practice. Finally, the comparison between numerical and experimental results allowed finding a good agreement between both, fact that ensures the ability of the proposed modeling strategy to deal with real engineering practical problems.
- Experimental Assessment of the Out-of-Plane Performance of Masonry Buildings Through Shaking Table TestsPublication . Candeias, P. X.; Costa, A. Campos; Mendes, N.; Costa, A. A.; Lourenço, P. B.This article presents the results of the LNEC-3D shaking table tests on two mock-ups, Brick House and Stone House, carried out in the scope of the workshop “Methods and challenges on the out-of-plane assessment of existing masonry buildings.” The mock-ups have a U shape with one facade wall and two orthogonal sidewalls. The facade has a central opening and a gable on top, whereas the two sidewalls, acting as abutments, are either blind or have a window. A unidirectional seismic action, in the perpendicular direction to main wall, was applied. Out-of-plane behavior of the facade was found, even if the response was clearly influenced by the presence of the window in one of the sidewalls, which led to significant torsion of the structure. The detailed description of the two tests and the conclusions are presented. The response of the mock-ups was evaluated based on the displacements, damage, and collapse mechanisms developed as function of an increasing intensity earthquake testing protocol, in which a pre-processed strong ground motion component of the Christchurch (New Zealand) earthquake (February 21, 2011) was used.
- «
- 1 (current)
- 2
- 3
- »