A new vision for fuel cells: application in cancer biomarker screening

Funder

Organizational Unit

Publications

A passive direct methanol fuel cell as transducer of an electrochemical sensor, applied to the detection of carcinoembryonic antigen

Publication . Carneiro, Liliana P.T.; Ferreira, Nádia S.; Tavares, Ana P.M.; Pinto, Alexandra M.F.R.; Mendes, Adélio; Sales, Maria Goreti Ferreira

This work describes an electrochemical sensor with a biomimetic plastic antibody film for carcinoembryonic antigen (CEA, an important biomarker in colorectal cancer), integrated in the electrical circuit of a direct methanol fuel cell (DMFC), working in passive mode and used herein as power supply and signal transducer. In detail, the sensing layer for CEA consisted of a Fluorine-doped Tin Oxide (FTO) conductive glass substrate – connected to the negative pole side of the DMFC – with a conductive poly (3,4-ethylenedioxythiophene) (PEDOT) layer and a polypyrrol (PPy) molecularly-imprinted polymer (MIP), assembled in-situ. This sensing element is then closed using a cover FTO-glass, hold in place with a clip, connected to the positive side of the DMFC. When compared with control DMFCs, the power curves of DMFC/Sensor integrated system showed decreased power values due to the MIP layer interfaced in the electrical circuit, also displaying high stability signals. The DMFC/Sensor was further calibrated at room temperature, in different medium (buffer, a synthetic physiological fluid model and Cormay® serum), showing linear responses over a wide concentration range, with a limit of detection of 0.08 ng/mL. The DMFC/Sensor presented sensitive data, with linear responses from 0.1 ng/mL to 100 μg/mL and operating well in the presence of human serum. Overall, the results obtained evidenced the possibility of using a DMFC as a transducing element in an electrochemical sensor, confirming the sensitive and selective readings of the bio (sensing) imprinted film. This integration paves the way towards fully autonomous electrochemical devices, in which the integration of the sensor inside the fuel cell may be a subsequent direction.

2021Journal article

Restricted access

Passive direct methanol fuel cells acting as fully autonomous electrochemical biosensors: Application to sarcosine detection

Publication . Silva Ferreira, Nadia; Carneiro, Liliana P.T; Viezzer, Christian; Almeida, Maria J.T.; Marques, Ana C.; Pinto, Alexandra M.F.R.; Fortunato, Elvira; Ferreira Sales, Maria Goreti

This work describes an innovative electrochemical biosensor that advances its autonomy toward an equipment-free design. The biosensor is powered by a passive direct methanol fuel cell (DMFC) and signals the response via an electrochromic display. Briefly, the anode side of the DMFC power source was modified with a biosensor layer developed using molecularly imprinted polymer (MIP) technology to detect sarcosine (an amino acid derivative that is a potential cancer biomarker). The biosensor layer was anchored on the surface of the anode carbon electrode (carbon black with Pt/Ru, 40:20). This was done by bulk radical polymerization with acrylamide, bis-acrylamide, and vinyl phosphonic acid. This layer selectively interacted with sarcosine when integrated into the passive DMFC (single or multiple, in a stack of 4), which acted as a transducer element in a concentration-dependent process. Serial assembly of a stack of hybrid DMFC/biosensor devices triggered an external electrochromic cell (EC) that produced a colour change. Calibrations showed a concentration-dependent sarcosine response from 3.2 to 2000 µM, which is compatible with the concentration of sarcosine in the blood of prostate cancer patients. The final DMFC/biosensor-EC platform showed a colour change perceptible to the naked eye in the presence of increasing sarcosine concentrations. This colour change was controlled by the DMFC operation, making this approach a self-controlled and self-signalling device. Overall, this approach is a proof-of-concept for a fully autonomous biosensor powered by a chemical fuel. This simple and low-cost approach offers the potential to be deployed anywhere and is particularly suitable for point-of-care (POC) analysis.

2022Journal article

Open access