Loading...
2 results
Search Results
Now showing 1 - 2 of 2
- Cu(In,Ga)Se2 based ultrathin solar cells the pathway from lab rigid to large scale flexible technologyPublication . Lopes, T.S.; Teixeira, J. P.; Curado, M. A.; Ferreira, B. R.; Oliveira, A. J. N.; Cunha, J. M. V.; Monteiro, M.; Violas, A.; Barbosa, J. R. S.; Sousa, P. C.; Çaha, I.; Borme, J.; Oliveira, K.; Ring, J.; Chen, W. C.; Zhou, Y.; Takei, K.; Niemi, E.; Deepak, F. L.; Edoff, M.; Brammertz, G.; Fernandes, P. A.; Vermang, B.; Salomé, P. M. P.The incorporation of interface passivation structures in ultrathin Cu(In,Ga)Se2 based solar cells is shown. The fabrication used an industry scalable lithography technique—nanoimprint lithography (NIL)—for a 15 × 15 cm2 dielectric layer patterning. Devices with a NIL nanopatterned dielectric layer are benchmarked against electron-beam lithography (EBL) patterning, using rigid substrates. The NIL patterned device shows similar performance to the EBL patterned device.The impact of the lithographic processes in the rigid solar cells’ performance were evaluated via X-ray Photoelectron Spectroscopy and through a Solar Cell Capacitance Simulator. The device on stainless-steel showed a slightly lower performance than the rigid approach, due to additional challenges of processing steel substrates, even though scanning transmission electron microscopy did not show clear evidence of impurity diffusion. Notwithstanding, time-resolved photoluminescence results strongly suggested elemental diffusion from the flexible substrate. Nevertheless, bending tests on the stainless-steel device demonstrated the mechanical stability of the CIGS-based device.
- Encapsulation of Nanostructures in a Dielectric Matrix Providing Optical Enhancement in Ultrathin Solar CellsPublication . Oliveira, Antonio; de Wild, Jessica; Oliveira, Kevin; Valença, Beatriz A.; Guerreiro, Joana Rafaela; Abalde-Cela, Sara; Lopes, Tomás; Ribeiro, Rodrigo M.; Cunha, José Miguel; M.C.Alberto; Monteiro, Margarida; Violas, André; Silva, Ana Gomes; Prado, Marta; Fernandes, P. A.; Vermang, Bart; Salomé, P. M. P.The incorporation of nanostructures in optoelectronic devices for enhancing their optical performance is widely studied. However, several problems related to the processing complexity and the low performance of the nanostructures have hindered such actions in real-life devices. Herein, a novel way of introducing gold nanoparticles in a solar cell structure is proposed in which the nanostructures are encapsulated with a dielectric layer, shielding them from high temperatures and harsh growth processing conditions of the remaining device. Through optical simulations, an enhancement of the effective optical path length of approximately four times the nominal thickness of the absorber layer is verified with the new architecture. Furthermore, the proposed concept in a Cu(In,Ga)Se2 solar cell device is demonstrated, where the short-circuit current density is increased by 17.4%. The novel structure presented in this work is achieved by combining a bottom-up chemical approach of depositing the nanostructures with a top-down photolithographic process, which allows for an electrical contact.