Browsing by Author "Mendes, A."
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Design of experiments optimization of fluorine-doped tin oxide films prepared by spray pyrolysis for photovoltaic applicationsPublication . Pinheiro, X.L.; Vilanova, A.; Mesquita, D.; Monteiro, M.; Eriksson, J.A.M.; Barbosa, J.R.S.; Matos, C.; Oliveira, A.J.N.; Oliveira, K.; Capitão, J.; Loureiro, E.; Fernandes, Paulo A.; Mendes, A.; Salomé, P.M.P.Transparent conducting oxides (TCOs) have witnessed an ever-expanding use in our lives through many optoelectronic applications, namely photovoltaic (PV) devices. Indium-tin oxide (ITO) is the most used and studied TCO, but it lacks thermal and chemical stability and indium is a scarce and toxic element. Fluorine-doped tin oxide (FTO) emerged as the most promising alternative to ITO, presenting better thermal and chemical stability. Among the numerous techniques for depositing FTO thin films over glass substrates, spray pyrolysis is the simplest and most economical, with great potential for upscaling. However, the relative importance of the experimental variables that influence the optoelectronic properties remains barely addressed. Following this premise, the present work aimed at optimizing the deposition of FTO films on soda lime glass (SLG) substrates by spray pyrolysis following a Design of Experiments (DoE) methodology. The optoelectronic properties of FTO-SLG substrates was evaluated based on their optical transmittance and sheet resistance, both combined in a figure of merit (FoM) tailored for PV applications. It was concluded that the volume of sprayed solution and the fluorine/tin ratio in the precursor have the greatest influence in the FoM, being the optimal deposition conditions a sprayed volume of 60.8 ml and a [F]/[Sn] ratio of 0.45. FTO-SLG substrates prepared with these conditions achieved a FoM of 0.680 Ω□−1/10, corresponding to a sheet resistance of 3.40 Ω□ and a transmittance equivalent to 77% of the maximum current generated in the considered spectrum. The improved FoM was validated in dye-sensitized and perovskite solar cells (DSSCs and PSCs, respectively), assembled with in-house optimized and commercial substrates. The efficiency of DSSCs was improved by 8.9% (relative), whereas PSCs achieved a light-to-power efficiency of 17% (absolute), corresponding to an improvement of 4.7% (relative).
- Life cycle assessment of a renewable energy generation system with a vanadium redox flow battery in a NZEB householdPublication . Gouveia, J.R.; Silva, E.; Mata, T.M.; Mendes, A.; Caetano, Nídia; Martins, A.A.Buildings are responsible for a significant part of the global energy consumption. Besides the need to improve their energy efficiency, new buildings also need to generate their own energy, preferably from renewable sources, to become more sustainable. As renewable energy generation is strongly dependent on the climatic conditions, energy storage must be considered when designing such a system. In this study, a cradle-to-grave life cycle assessment (LCA) study of a renewable energy generation system with a prototype Vanadium flow battery integrated in a Near Zero Energy Building (NZEB) is performed. A combined grid-connected PV and a solar thermal system generates the energy, and it was dimensioned to supply the annual energy needs of a household in Porto, Portugal considering the local climatic conditions. As an end of life scenario, it is assumed that the battery is dismantled and most of the materials are recycled. A functional unit of 1 kWh of supplied energy to the system was considered, and study results show that environmental impacts are reduced when the energy is produced onsite and the battery components are recycled or reused. A sensitivity analysis was conducted changing the household’s geographic location.
- Life cycle assessment of a vanadium flow batteryPublication . Gouveia, J.; Mendes, A.; Monteiro, R.; Mata, T.M.; Caetano, Nídia; Martins, A.A.Battery storage technologies have been showing great potential to address the vulnerability of renewable electricity generation systems. Among the various options, vanadium redox flow batteries are one of the most promising in the energy storage market. In this work, a life cycle assessment of a 5 kW vanadium redox flow battery is performed on a cradle-to-gate approach with focus on the vanadium electrolytes, since they determine the battery’s storage capacity and can be readjusted and reused indefinitely. The functional unit is 1 kWh stored by the battery. The initial results show that the environmental hotspots reside mainly in the structural and material components of the battery, evidencing the need for alternative or recycled materials, preferably produced locally. Since the quantity of electrolytes determine the amount of storable electricity, an analysis was conducted on the variation of the impacts with the increase of storage capacity. An alternative scenario with reused electrolytes was also performed. Results show that with the increase of storage capacity, the contribution of the electrolytes to the impacts decrease significantly by stored kWh. In the reused electrolytes scenario, impacts were reduced mainly for the Acidification and Mineral, fossil and renewable resource depletion categories.