Browsing by Author "Fernandes, R.L."
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Numerical evaluation of dissimilar cohesive models to predict the behavior of Double-Cantilever Beam specimensPublication . Fernandes, R.L.; Campilho, RaulAdhesive bonding is a widely used joining method in industries such as aerospace, aeronautical and automotive because of specific advantages compared to the traditional fastening methods. Numerical approaches for the damage simulation of bonded joints based on fracture mechanics usually rely on Cohesive Zone Models (CZM). CZM suppose the characterization of the CZM laws in tension and shear, which are combined in mixed-mode criteria to predict the strength of bonded joints. This work evaluated the tensile fracture toughness (Gm) and CZM laws of bonded joints for two adhesives with distinct ductility. The Double-Cantilever Beam (DCB) test was used. The experimental work consisted of the tensile fracture characterization by the J-integral technique. A digital image correlation method was used for the evaluation of the tensile relative displacement (delta(n)) of the adhesive layer at the crack tip. Finite Element (FE) simulations were carried out to assess the accuracy of triangular, trapezoidal and linear-exponential CZM laws in predicting the experimental behaviour of the DCB tests. As output of this work, information regarding the applicability of these CZM laws to each type of adhesive is provided, allowing the subsequent strength prediction of bonded joints.
- Numerical Evaluation of the Direct Method for Cohesive Law Extraction in Shear by the End-Notched Flexure TestPublication . Fernandes, R.L.; Campilho, R.D.S.G.; Leitão, A.C.C.; Azevedo, J.C.S.With adhesive bonding, design can be oriented towards lighter structures, not only regarding the direct weight saving advantages of the joint over fastened or welded joints, but also because of flexibility to joint different materials. Cohesive Zone Models (CZM) are a powerful design tool, although the CZM laws of the adhesive bond in tension and shear are required as input in the models. This work evaluated the shear fracture toughness and CZM laws of bonded joints. The End-Notched Flexure (ENF) test geometry was used with this purpose. The experimental work consisted on the shear fracture characterization of the bond by conventional and the J-integral techniques. Additionally, by the J-integral technique, the precise shape of the cohesive law was defined. Numerical Finite Element (FE) simulations were carried out in Abaqus® to assess the accuracy of the obtained CZM laws in predicting the experimental behaviour of the ENF tests, with positive results. As output of this work, fracture data is provided in shear for the selected adhesive, allowing the subsequent strength prediction of bonded joints.