Percorrer por autor "Buddhi, Dharam"
A mostrar 1 - 3 de 3
Resultados por página
Opções de ordenação
- Design of a Spiral Double-Cutting Machine for an Automotive Bowden Cable Assembly LinePublication . Barbosa, André F. G.; Campilho, Raul; Silva, Francisco J. G.; Sánchez-Arce, Isidro J.; Prakash, Chander; Buddhi, DharamThe manufacture of automotive components requires innovative technologies and equipment. Due to the competitiveness in the sector, the implementation of automatic and robotic equipment has been vital in its development to produce the largest number of products in the shortest amount of time. Automation leads to a significant reduction in defects and enables mass production and standardization of the final product. This work was based on the need of an automotive components’ company to increase the rate of spiral cable cutting, used as protection for Bowden (control) cables. Currently, this component, used in automotive systems, is processed with simple cutting machines and cleaning machines. Based on the design science research (DSR) methodology, this work aims to develop a machine capable of performing the cutting and cleaning of two spiral cables simultaneously and automatically. The development of this machine was based on existing machines, and the biggest challenge was the implementation of a double-cutting system. The designed machine met the initial requirements, such as enabling the simultaneous cut of two spirals, being fully automatic, doubling the output over the current solution, and fully complying with the current legislation.
- Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive IndustryPublication . Pereira, José L. T. A.; Campilho, Raul; Silva, Francisco J. G.; Sánchez-Arce, Isidro J.; Prakash, Chander; Buddhi, DharamControl cables transfer force between two separate locations by a flexible mean, and hence, they are important in the automotive industry and many others; their terminals interact with both moving and moved mechanisms, so they must be strong. Cable terminals are commonly made of ZAMAK and are created by injection molding. However, such a production method requires leaving extra material to allow the correct molding, also known as sprues, which are removed later in the process. In this case, the sprues were separating from the terminals in an uncontrolled way. In this work, the cause of sprues separating prematurely from the terminals in a production line is addressed. The whole process was analyzed, and each possible solution was evaluated using process improvement techniques and the Finite Element Method, leading to the best solutions. Molds, mold structures, and auxiliary equipment were improved, resulting in a minimally invasive intervention and remaining compatible with other equipment. Cost analyses were done, indicating an investment return in less than a year. The modification led to a reduction of 62.6% in the sprue mass, while porosity was reduced by 10.2% and 55.9%, corresponding to two terminal models. In conclusion, the interventions fulfilled the requirements and improved the operation of the line.
- Improving the Efficiency of the Bowden Cable Terminal Injection Process for the Automotive IndustryPublication . Pereira, José L. T. A.; Campilho, Raul; Silva, Francisco J. G.; Sánchez-Arce, Isidro J.; Prakash, Chander; Buddhi, DharamControl cables transfer force between two separate locations by a flexible mean, and hence, they are important in the automotive industry and many others; their terminals interact with both moving and moved mechanisms, so they must be strong. Cable terminals are commonly made of ZAMAK and are created by injection molding. However, such a production method requires leaving extra material to allow the correct molding, also known as sprues, which are removed later in the process. In this case, the sprues were separating from the terminals in an uncontrolled way. In this work, the cause of sprues separating prematurely from the terminals in a production line is addressed. The whole process was analyzed, and each possible solution was evaluated using process improvement techniques and the Finite Element Method, leading to the best solutions. Molds, mold structures, and auxiliary equipment were improved, resulting in a minimally invasive intervention and remaining compatible with other equipment. Cost analyses were done, indicating an investment return in less than a year. The modification led to a reduction of 62.6% in the sprue mass, while porosity was reduced by 10.2% and 55.9%, corresponding to two terminal models. In conclusion, the interventions fulfilled the requirements and improved the operation of the line.