Browsing by Author "Bose, Sourav"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Decoupling of Optical and Electrical Properties of Rear Contact CIGS Solar CellsPublication . Cunha, Jose M. V.; Fernandes, P. A.; Salome, Pedro M. P.; Lopes, Tomas S.; Bose, Sourav; Hultqvist, Adam; Chen, Wei-Chao; Donzel-Gargand, Olivier; Ribeiro, Rodrigo M.; Oliveira, Antonio J. N.; Edoff, MarikaA novel architecture that comprises rear interface passivation and increased rear optical reflection is presented with the following advantages: i) enhanced optical reflection is achieved by the deposition of a metallic layer over the Mo rear contact; ii) improved interface quality with CIGS by adding a sputtered Al 2 O 3 layer over the metallic layer; and, iii) optimal ohmic electrical contact ensured by rear-openings refilling with a second layer of Mo as generally observed from the growth of CIGS on Mo. Hence, a decoupling between the electrical function and the optical purpose of the rear substrate is achieved. We present in detail the manufacturing procedure of such type of architecture together with its benefits and caveats. A preliminary analysis showing an architecture proof-of-concept is presented and discussed.
- Rear Optical Reflection and Passivation Using a Nanopatterned Metal/Dielectric Structure in Thin-Film Solar CellsPublication . Lopes, Tomas S.; Cunha, Jose M. V.; Bose, Sourav; Barbosa, Joao R. S.; Borme, Jerome; Donzel-Gargand, Olivier; Rocha, Celia; Silva, Ricardo; Hultqvist, Adam; Chen, Wei-Chao; Silva, Ana G.; Edoff, Marika; Fernandes, P. A.; Salome, Pedro M. P.Currently, one of the main limitations in ultrathin Cu(In,Ga)Se 2 (CIGS) solar cells are the optical losses, since the absorber layer is thinner than the light optical path. Hence,light management, including rear optical reflection, and light trapping is needed. In this paper, we focus on increasing the rear optical reflection. For this, a novel structure based on having a metal interlayer in between the Mo rear contact and the rear passivation layer is presented. In total, eight different metallic interlayers are compared. For the whole series, the passivation layer is aluminum oxide (Al 2 O 3 ). The interlayers are used to enhance the reflectivity of the rear contact and thereby increasing the amount of light reflected back into the absorber. In order to understand the effects of the interlayer in the solar cell performance both from optical and/or electrical point of view, optical simulations were performed together with fabrication and electrical measurements. Optical simulations results are compared with current density-voltage (J-V) behavior and external quantum efficiency measurements. A detailed comparison between all the interlayers is done, in order to identify the material with the greatest potential to be used as a rear reflective layer for ultrathin CIGS solar cells and to establish fabrication challenges. The Ti-W alloy is a promising a rear reflective layer since it provides solar cells with light to power conversion efficiency values of 9.9%, which is 2.2% (abs) higher than the passivated ultrathin sample and 3.7% (abs) higher than the unpassivated ultrathin reference sample.