Browsing by Author "Freitas, M.A.V."
Now showing 1 - 3 of 3
Results Per Page
Sort Options
- Economic analysis of microalgae biodiesel production in a small-scale facilityPublication . Branco-Vieira, M.; Mata, T.M.; Martins, A.A.; Freitas, M.A.V.; Caetano, NídiaIndustrial production and commercialization of biodiesel from microalgae have become a good alternative to conventional feedstock. Microalgae show high growth rate and carbon sequestration and can be easily cultivate in fresh and/or marine water, using non-arable soil. This study aims to analyze the technical and economic feasibility of biodiesel production from Phaeodactylum tricornutum, using an algae biomass production scaled-up scenario, considering local reality prices and available technologies. The model assumes 80,000 m3 of microalgae cultivation, in a set of bubble column photobioreactors installed on 15.247 ha of land, reaching a total of 1,811 tons of microalgae biomass and 171,705 L of biodiesel per year. The production cost estimated for microalgae biomass is 2.01 € kg−1 and for biodiesel is 0.33 € L−1. The ROI calculated for the project is 10% with a 10 years’ payback time and an EBITDA of 588,139 € year−1. Despite the project’s viability in the medium term, the cost of producing microalgae biodiesel remains high when compared to fossil fuels. Thus, unless greater technological maturity is achieved to make the process more economical, it will not be viable in the short term.
- A life cycle inventory of microalgae-based biofuels production in an industrial plant conceptPublication . Branco-Vieira, M.; Costa, D.; Mata, T.M.; Martins, A.A.; Freitas, M.A.V.; Caetano, NídiaMicroalgae have been reported as a promising alternative for biofuels production. However, the use of microalgae for biofuels is still a challenge due to the intense energy use and the generation of a significant amount of biomass residues in the process. In order to analyze the environmental impacts of different technological processes for the production of biodiesel from microalgae, several studies have been published making use of the Life Cycle Assessment (LCA) methodology, which allows the recognition of the process bottlenecks and supports the identification of alternatives for a more efficient use of the feedstock. Therefore, in this study, a Life Cycle Inventory (LCI) is compiled, based on real pilot-scale process data, which was scaled-up to a microalgae biomass industrial plant for biofuel production. Values of energy, nutrients, water, and materials consumption are used to create an inventory of inputs and outputs for biomass cultivation and biodiesel production, in order to acquire data to conduct a complete LCA modeling in future studies. According to this model, to produce 1 kg of biodiesel it is necessary about 12 kg of dried algae biomass. This study supports the decision-making process in biofuel production to promote the development of sustainable pilot and large-scale algae-based industry, through the identification of critical factors.
- A life cycle inventory of microalgae-based biofuels production in an industrial plant conceptPublication . Branco-Vieira, M.; Costa, D.; Mata, T.M.; Martins, A.A.; Freitas, M.A.V.; Caetano, NídiaMicroalgae have been reported as a promising alternative for biofuels production. However, the use of microalgae for biofuels is still a challenge due to the intense energy use and the generation of a significant amount of biomass residues in the process. In order to analyze the environmental impacts of different technological processes for the production of biodiesel from microalgae, several studies have been published making use of the Life Cycle Assessment (LCA) methodology, which allows the recognition of the process bottlenecks and supports the identification of alternatives for a more efficient use of the feedstock. Therefore, in this study, a Life Cycle Inventory (LCI) is compiled, based on real pilot-scale process data, which was scaled-up to a microalgae biomass industrial plant for biofuel production. Values of energy, nutrients, water, and materials consumption are used to create an inventory of inputs and outputs for biomass cultivation and biodiesel production, in order to acquire data to conduct a complete LCA modeling in future studies. According to this model, to produce 1 kg of biodiesel it is necessary about 12 kg of dried algae biomass. This study supports the decision-making process in biofuel production to promote the development of sustainable pilot and large-scale algae-based industry, through the identification of critical factors.