Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.22/7381
Título: Cohesive law estimation of adhesive joints in mode II condition
Autor: Azevedo, J.C.S.
Campilho, Raul
Silva, F.J.G. da
Faneco, T.M.S.
Lopes, R.M.
Palavras-chave: Crack growth
Finite Element analysis
Fracture mechanics
Structural integrity
Data: 2015
Editora: Elsevier
Relatório da Série N.º: Theoretical and Applied Fracture Mechanics;Vol. 80, Part B
Resumo: The adhesive bonding technique enables both weight and complexity reduction in structures that require some joining technique to be used on account of fabrication/component shape issues. Because of this, adhesive bonding is also one of the main repair methods for metal and composite structures by the strap and scarf configurations. The availability of strength prediction techniques for adhesive joints is essential for their generalized application and it can rely on different approaches, such as mechanics of materials, conventional fracture mechanics or damage mechanics. These two last techniques depend on the measurement of the fracture toughness (GC) of materials. Within the framework of damage mechanics, a valid option is the use of Cohesive Zone Modelling (CZM) coupled with Finite Element (FE) analyses. In this work, CZM laws for adhesive joints considering three adhesives with varying ductility were estimated. The End-Notched Flexure (ENF) test geometry was selected based on overall test simplicity and results accuracy. The adhesives Araldite® AV138, Araldite® 2015 and Sikaforce® 7752 were studied between high-strength aluminium adherends. Estimation of the CZM laws was carried out by an inverse methodology based on a curve fitting procedure, which enabled a precise estimation of the adhesive joints’ behaviour. The work allowed to conclude that a unique set of shear fracture toughness (GIIC) and shear cohesive strength (ts0) exists for each specimen that accurately reproduces the adhesive layer’ behaviour. With this information, the accurate strength prediction of adhesive joints in shear is made possible by CZM.
Peer review: yes
URI: http://hdl.handle.net/10400.22/7381
DOI: 10.1016/j.tafmec.2015.09.007
Versão do Editor: http://www.sciencedirect.com/science/article/pii/S0167844214201224
Aparece nas colecções:ISEP – DEM – Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ART1_RaulCampilho_2015.pdf1,94 MBAdobe PDFVer/Abrir    Acesso Restrito. Solicitar cópia ao autor!


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.