Utilize este identificador para referenciar este registo:
|Título:||Strap repairs using embedded patches: numerical analysis and experimental results|
|Autor:||Pinto, A. M. G.|
Mendes, Isabel R.
Baptista, A. P. M.
Finite element method
|Editora:||Taylor & Francis|
|Relatório da Série N.º:||Journal of Adhesion Science and Technology;Vol. 28, Issue 14-15|
|Resumo:||Adhesively bonded repairs offer an attractive option for repair of aluminium structures, compared to more traditional methods such as fastening or welding. The single-strap (SS) and double-strap (DS) repairs are very straightforward to execute but stresses in the adhesive layer peak at the overlap ends. The DS repair requires both sides of the damaged structures to be reachable for repair, which is often not possible. In strap repairs, with the patches bonded at the outer surfaces, some limitations emerge such as the weight, aerodynamics and aesthetics. To minimize these effects, SS and DS repairs with embedded patches were evaluated in this work, such that the patches are flush with the adherends. For this purpose, in this work standard SS and DS repairs, and also with the patches embedded in the adherends, were tested under tension to allow the optimization of some repair variables such as the overlap length (LO) and type of adhesive, thus allowing the maximization of the repair strength. The effect of embedding the patch/patches on the fracture modes and failure loads was compared with finite elements (FE) analysis. The FE analysis was performed in ABAQUS® and cohesive zone modelling was used for the simulation of damage onset and growth in the adhesive layer. The comparison with the test data revealed an accurate prediction for all kinds of joints and provided some principles regarding this technique.|
|Versão do Editor:||http://www.tandfonline.com/doi/full/10.1080/01694243.2012.698130#.VL-QS9KsXTp|
|Aparece nas colecções:||ISEP – DEM – Artigos|
Ficheiros deste registo:
|ART1_ArnaldoPinto_DEM_2014.pdf||623,43 kB||Adobe PDF||Ver/Abrir|