Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.22/5286
Título: Effect of temperature on the shear strength of aluminium single lap bonded joints for high temperature applications
Autor: Banea, Mariana D.
Silva, Lucas F. M. da
Campilho, Raul
Palavras-chave: High temperature adhesives
Single lap joints
Temperature tests
Cohesive zone model
Data: 2014
Editora: Taylor & Francis
Relatório da Série N.º: Journal of Adhesion Science and Technology;Vol. 28, Issue 14-15
Resumo: An experimental and numerical investigation into the shear strength behaviour of adhesive single lap joints (SLJs) was carried out in order to understand the effect of temperature on the joint strength. The adherend material used for the experimental tests was an aluminium alloy in the form of thin sheets, and the adhesive used was a high-strength high temperature epoxy. Tensile tests as a function of temperature were performed and numerical predictions based on the use of a bilinear cohesive damage model were obtained. It is shown that at temperatures below Tg, the lap shear strength of SLJs increased, while at temperatures above Tg, a drastic drop in the lap shear strength was observed. Comparison between the experimental and numerical maximum loads representing the strength of the joints shows a reasonably good agreement.
Peer review: yes
URI: http://hdl.handle.net/10400.22/5286
DOI: 10.1080/01694243.2012.697388
Versão do Editor: http://www.tandfonline.com/doi/full/10.1080/01694243.2012.697388#.VKqmFdKsXTo
Aparece nas colecções:ISEP – DEM – Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ART2_RaulCampilho_DEM_2014.pdf785,2 kBAdobe PDFVer/Abrir    Acesso Restrito. Solicitar cópia ao autor!


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.