Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.22/4197
Título: Low-loss austempered ductile iron gears: experimental evaluation comparing materials and lubricants
Autor: Magalhães, Luís
Martins, R.
Seabra, Jorge
Palavras-chave: Gears
Low-loss
ADI
Efficiency
Data: 2010
Editora: Elsevier
Relatório da Série N.º: Tribology International; Vol. 46, Issue 1
Resumo: An experimental study to evaluate the power dissipation of gears was performed. Three low-loss gear models were manufactured using standard 20° pressure angle tools. Austempered ductile iron (ADI) and 20MnCr5 carburized steel gears were tested in an FZG gear test machine using mineral, ester and polyalphaolephine (PAO)-based oils. The results compare power dissipation, the influence of different tooth flank geometries, materials and lubricants. This work concludes that conventional power-transmission gears can be replaced by these improved and more efficient low–loss models, which can be produced using common tools and that steel gears can be successfully replaced by austempered ductile iron gears.
Peer review: yes
URI: http://hdl.handle.net/10400.22/4197
ISSN: 0301-679X
Versão do Editor: http://www.sciencedirect.com/science/article/pii/S0301679X11001745
Aparece nas colecções:ISEP – CIDEM – Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ART_LuisMagalhaes_2010_CIDEM.pdf1,26 MBAdobe PDFVer/Abrir


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.