Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.22/4120
Título: Strap repair optimization by using embedded patches
Autor: Pinto, A. M. G.
Campilho, Raul
Mendes, Isabel R.
Magalhães, A. G.
Baptista, A. P. M.
Palavras-chave: Epoxy adhesive
Adhesively-bonded repairs
Experimental testing
Strap repairs
Data: 2013
Editora: Trans Tech Publications
Relatório da Série N.º: Materials Science Forum; Vol. 730-732
Resumo: Adhesively-bonded techniques offer an attractive option for repair of aluminium structures, and currently there are three widely used configurations, i.e., single-strap (SS), double-strap (DS) and scarf repairs. SS and DS repairs are straightforward to execute but stresses in the adhesive layer peak at the ends of the overlap. DS repairs additionally require both sides of the damaged structures to be reachable for repair, which is often not possible. In these repair configurations, some limitations emerge such as the weight, aerodynamic performance and aesthetics. The scarf repair is more complex to fabricate but stresses are more uniform along the adhesive bondline. Few studies of SS and DS repairs with embedded patches, such that these are completely flush with the adherends, are available in the literature. Furthermore, no data is available about the effects of geometrical and material parameters (e.g. the Young’s modulus of adhesive, E) on the mechanical behaviour optimization of embedded repairs. For this purpose, in this work standard SS and DD repairs, and also with embedded patches in the adherends, were tested under tension to allow the geometry optimization, by varying the overlap length (LO), thus allowing the maximization of the repairs strength. The influence of the patch embedding technique, showing notorious advantages such as aerodynamic or aesthetics, was compared in strength with standard strap repairs, for the viability analysis of its implementation. As a result of this work, some conclusions were drawn for the design optimization of bonded repairs on aluminium structures.
Peer review: yes
URI: http://hdl.handle.net/10400.22/4120
ISSN: 0255-5476
Versão do Editor: http://www.scientific.net/MSF.730-732.1036
Aparece nas colecções:ISEP – CIDEM – Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ART_ArnaldoPinto_2013_CIDEM.pdf95,84 kBAdobe PDFVer/Abrir


FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.