Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.22/3463
Título: Re-use assessment of thermoset composite wastes as aggregate and filler replacement for concrete-polymer composite materials: a case study regarding GFRP pultrusion wastes
Autor: Ribeiro, M. C. S.
Meira Castro, A C
Silva, Francisco J. G.
Santos, Jorge M.
Meixedo, João Paulo
Fiúza, António
Dinis, M. L.
Alvim, Mário Rui
Palavras-chave: Glass fibre reinforced polymers
Thermoset composite wastes
Mechanical recycling
Polymer concrete materials
Mechanical behaviour
Nonparametric factorial data analysis
Data: 2015
Editora: Elsevier
Resumo: Glass fibre-reinforced plastics (GFRP), nowadays commonly used in the construction, transportation and automobile sectors, have been considered inherently difficult to recycle due to both the cross-linked nature of thermoset resins, which cannot be remoulded, and the complex composition of the composite itself, which includes glass fibres, polymer matrix and different types of inorganic fillers. Hence, to date, most of the thermoset based GFRP waste is being incinerated or landfilled leading to negative environmental impacts and additional costs to producers and suppliers. With an increasing awareness of environmental matters and the subsequent desire to save resources, recycling would convert an expensive waste disposal into a profitable reusable material. In this study, the effect of the incorporation of mechanically recycled GFRP pultrusion wastes on flexural and compressive behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates (0%, 4%, 8% and 12%, w/w), with distinct size grades (coarse fibrous mixture and fine powdered mixture), were incorporated into polyester PM as sand aggregates and filler replacements. The effect of the incorporation of a silane coupling agent was also assessed. Experimental results revealed that GFRP waste filled polymer mortars show improved mechanical behaviour over unmodified polyester based mortars, thus indicating the feasibility of GFRP waste reuse as raw material in concrete-polymer composites.
URI: http://hdl.handle.net/10400.22/3463
Versão do Editor: http://www.sciencedirect.com/science/article/pii/S0921344913001985#
Aparece nas colecções:ISEP – DMA – Artigos

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
ART_MRibeiro_2013_DMA.pdf1,49 MBAdobe PDFVer/Abrir

FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.